General, field of application
The DICKOW® vertical submersible long shaft pump is a one or multistage centrifugal pump. The performance range covers capacities up to 500 m³/h (2200 US gpm) and differential heads up to 400 mLC (1310 ft) and is subdivided such that best efficiency is granted at all service conditions.
With a wide selection of materials, several design options and shaft sealing systems, the HZV pumps are suitable for handling almost all kinds of liquids There are 5 sentencesare free of abrasive solids and of suitable viscosity.
Common applications are unloading of fuels and solvents from underground tanks, e.g. for kerosene respectively jet fuel in hydrant systems for aircraft refueling (Cat.1-design) and pumping condensate or ammonia (barrel casing design).
The DICKOW®-Inline-Pumps, series NCV / NCVL, have been developed for the chemical, petrochemical and related industries.
Since the pumps are installed inline, only a minimum of space is required and therefore, these pumps are suitable for package units. No time-consuming alignment of couplings is required. Ball bearing failures through inadequate alignment are excluded.
With a wide selection of materials and shaft sealing systems, the NCV-pumps are suitable for handling nearly all kinds of liquids used in the above mentioned industries.
For example: acids, lyes, hydrocarbons, hot water up to 234 ºC (455 ºF), hot oil up to 350 ºC (660 ºF), cooling fluids, solvents etc.
The DICKOW® submersible pump, type NCT, for the chemical industry is a vertical pump with separate discharge pipe.
The maximum capacity goes up to 700 m³/h. Higher capacities are available on request.
The pump type NCT has been developed for chemical, petrochemical and related industries. With a wide selection of materials, the DICKOW® submersible pumps are suitable for handling almost all liquids which are used in above mentioned industries.
For example: acids, lyes, hydrocarbons, condensation products, solvents etc.